False fire alarm at building near Danbury Rd, Wilton CT
Fire & ArsonFire alarm activation reported at a building near Danbury Road. Crews checked the second floor office but found no smoke or fire. Unable to reset the alarm system due to missing code. Keyholder was contacted to address the issue.
Audio|Source: Wilton Fire Dispatch - Analog
03:40
Transcript:
00:00
Mr. Chairman, we don't know the channel we do in the audible.
00:03
Shroves go off, let's command.
00:05
Remember, Channel 2 for this, Channel 2 for Danbury Road.
00:08
First,
00:10
Steve, One and two, Michael Sharon,
00:12
Channel 3rd, Channel 3, 545. Channel 2,
00:15
we're on Cine, near Danbury Road, stages of the hydrant.
00:25
Before we got entry back here.
00:31
Please.
00:35
Okay,
00:37
this message.
00:40
Do special commands?
00:45
If you get a brother alarm, you can disregard the maid entry.
00:50
It's just not. We're investigating.
00:51
No sign of smoke or fire.
00:54
First, Steve's investigating 930.
01:00
One driver, come in.
01:05
Go.
01:08
The accuracy head on second floor office.
01:11
No hazard up here.
01:15
Roger? Can you get to the panel? See if you get a reset?
01:21
We needed a code so we couldn't reset it last of the other night.
01:28
Roger, stand by.
01:34
And this much?
01:38
Thank you, Judge Johnson.
01:43
Did you copy that? The unactivated head floor two.
01:48
No parent clause. Was there a keyholder responding or not?
01:55
Did you copy that?
01:58
They did not make contact with any keyholder. I could try giving the keyholder a call now.
02:07
All right, if not, we're going to leave the system and alarm. We're on ever reset. We'll secure the building and we'll go on service.
02:12
There's no sign that's mobile fire.
02:14
If you can get a contact, we don't just let them know. If not, we'll be clearing up.
02:21
Receive that voice.
02:22
This question is a minute?
02:29
John.
02:33
I have the key holder on the phone right now.
02:37
Where did you find the activated sprinkler? It's activated smoke detector, floor number two, no parent clock.
02:46
So we've secured a building. We're going to allow free upgoing service because we're not able to reset. We don't have a code.
02:51
Let's see want to relay that to you. We'll attempt it now.
03:07
Heard the keyholder, can you put some type of mark on the activates multi-factor so when the alarm attack arrives, they know which one it was?
03:16
Yeah, 10-4[1].
03:18
We'll do that.
03:19
We're going to free up for now.
03:25
Copy. Thank you. 942.
03:31
24 to hold in this match.
03:34
Then 24.
03:37
We then the least like command and service. I'll switch back to channel one.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledges receipt and understanding of message; indicates affirmation or confirmation.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Danbury Rd, Wilton, CT 06897
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
