Fire alarm triggered at building, no active fire, Stanwood WA
Fire & ArsonA fire alarm was activated at a building near 284th Street Northeast. Emergency responders found no active fire. The fire alarm system is in trouble mode, and the building is placed on fire watch as a precaution.
Audio|Source: Snohomish County Fire Primary Response
02:10
Transcript:
00:00
890, Nedd 3 results, near 284th Street Northeast.
00:17
Copy, hold down a second.
00:20
So, call into per command. Can you check for reset? Check for reset.
00:29
Page 10 from Indian 20.
00:32
Hey 10.
00:34
You guys are going to access this residence off at home 3-2. Please don't call our internet.
00:43
Silver engine 23.
00:46
Did you read dispatch a medic unit 23? Could you read dispatch a medic unit to me?
00:54
Received.
01:00
26.
01:02
You're thinking.
01:07
Snowcom from Kinderkare Command.
01:10
Okay, go ahead.
01:12
Were you able to check on a reset?
01:15
Working on that.
01:20
10-557?
01:22
Copy.
01:27
Treter Care, Command, from Snowcom.
01:32
Any care, command.
01:34
A long as he does have a reset in there.
01:41
Command received,
01:43
the system is in trouble.
01:45
Building is on a fire watch as well.
01:48
You can terminate command.
01:50
Copy, Shade Command, Commit.
01:54
Affirmative.
01:55
And no problem, can you have Fire Marshal?
02:02
Can you have a county fire marshal call me at (number withheld)?
02:09
Have that.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near 284th St NW, Stanwood, WA 98292
Correct
Incorrect
