Fire alarm caused by electrical issue near East Dixon Blvd, Shelby NC
Fire & ArsonA fire alarm was triggered near East Dixon Boulevard at the intersection of Post Road and Foxborough Road in Shelby. Fire units responded and found no fire. The cause was determined to be an electrical issue in a bathroom. The building is a single-story commercial property and the situation is under investigation.
Audio|Source: Cleveland County, Shelby, and Kings Mountain Fire
01:5
Transcript:
00:00
Shelby Station 3, Shelby Station 2,
00:04
COM fire alarm CO12,
00:07
near East Dixon Boulevard.
00:09
Cross street of Post Road and Foxborough Road,
00:14
Shelby Station 3, Shelby Station 2,
00:17
COMM fire alarm CO12,
00:20
near East Dixon Boulevard.
00:22
Cross street of Post Road and Foxborough Road.
00:32
Squad 26, 10-4[1].
00:38
near East Dixon Boulevard at the Vodgels.
00:45
I'm going to do the communications.
00:46
Everything here is going to be 10-4[1], had an electrical issue in the bathroom.
00:50
All shall the ends be clear.
00:57
County 26 on scene, single-story commercial occupancy.
01:01
Nothing showing 26 has the main investigative mode.
01:05
10-4[1].
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment / OK
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near E Dixon Blvd, Shelby, NC 28152
Correct
Incorrect
