False fire alarm at residential address caused by technical glitch, Seekonk MA


Firefighters responded to a fire alarm near Burnside Ave in Seekonk. They found no fire or carbon monoxide, and the alarm was likely caused by a Wi-Fi or technical malfunction.
Audio|Source: Seekonk Fire Dispatch
01:6
Transcript:
00:00
8225, we're out of near Burnside Ave.
00:05
Nothing showing here, you'll be investigating.
00:08
Hazard engine 2, you're at near Burnside Ave., nothing showing. You're going to be investigating further, 0722.
00:18
Engine 2.5.
00:22
Power is that an engine 2?
00:27
We need to check the house at three levels and find any levels of CO in the house.
00:32
The alarm was going off when we arrived.
00:36
It seems to be a Wi-Fi glitch maybe if you order to push the test button, which may or may not have the alarm company call us, but everything seems to be fine at this time.
00:47
Advice to call us back if something happens again. Engine 2 is going to be clear.
00:53
File on an accident, engine 2. You've met at the whole house with zero levels.
00:57
Possibly a Wi-Fi issue with the system.
01:00
They've been advised to call back if anything changes.
01:03
I'll show engine 2 clear. Returning and Cirrus now 0730.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Burnside Ave, Seekonk, MA 02771
Correct
Incorrect