Fire alarm triggered at Pacific Avenue building, no fire found, Santa Cruz CA
Fire & ArsonFire crews responded to a fire alarm triggered at a building on Pacific Avenue. The alarm company could not silence or reset the alarm remotely. Firefighters contacted a responsible party on site and found a secondary control panel. No active fire was found.
Audio|Source: Santa Cruz County Fire
01:34
Transcript:
00:00
Pacific Avenue commandicum.
00:03
Good.
00:04
The alarm company is unable to silence or reset it remotely.
00:09
I have a name for a responsible. You want me to try them?
00:13
Bye.
00:22
Roof division command copies. Go ahead and stand by one. Break. Division Charlie from command, power and conditions.
00:34
I copy that. You're getting lift.
00:36
Roof division is getting off the roof.
00:38
You feel that hold it adequate.
00:46
Copy that break, roof division from command, I copy.
00:48
You guys are cleared to get off the roof, thank you.
00:57
Pacific Avenue Command.
00:59
Did you copy my left?
01:02
Okay, affirms, standby.
01:03
We have a responsible on scene and we found a secondary panel.
01:06
Copy that.
01:17
to confirm that secondary panel is getting run unsuccessful.
01:25
Copy.
01:26
We'll keep working on it.
01:28
Have the response. We'll give the alarm stuff for you on the phone direction.
01:32
On the cell phone, let's read that'll work.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Pacific Ave, Santa Cruz, CA 95060
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
