Fire alarm activated at Raleigh building, no fire found, Raleigh NC
Fire alarm panel activated near 2620 in Raleigh. Responders arrived and found no visible fire or smoke through the windows. Crews are investigating and attempting to reset the alarm.
Audio|Source: Wake County Fire
02:4
Transcript:
00:00
I got an alarm panel at the front. It's going to be near 2620. We're with the resource officer now.
00:06
I believe it's going to be vacant in the bathroom, but it can be about five minutes, I'll confirm.
00:15
All that's a thing, Ralph.
00:20
You can cancel the plus one.
00:27
Copy that, returning to serve.
00:29
He is on scene. Got a two vehicle, minor, NBC.
00:37
Two officers established command will be out with patient.
00:43
The station battalion is out for investigation.
00:52
Man, can you, uh,
00:59
can you go to the rise of room and see if you can reset this alarm?
01:25
Fort manpower, I've got one rider down in the roadway.
01:28
I need C-Kine and C-Spy and immobilization, please.
01:37
Smedic 1-4.
01:40
Single patient walking wind that as is now.
01:42
Rider 5 will nose you in in front of this pickup truck.
01:48
The medic 1-4 copies.
01:53
Lighter 5 after that orange, Nissan, you'll begin to come through.
02:01
... From the exterior,
02:03
nothing visible through the windows.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Raleigh, NC
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect