Fire crews find heating unit as source of building smoke, Park City UT


Fire crews investigated smoke in a building on Woodside Ave. They found the source was a small heating unit. They ventilated the building, reset fire alarms, and checked all units including unit 204. After confirming no smoke or heat remained, the crews prepared to clear the scene.
Audio|Source: Summit County Sheriff, EMS and Park City Police
01:36
Transcript:
00:00
Captain 34 from Engineer 34 I got the full stations reset
00:13
Copy that
00:18
I met this Woodside Command
00:24
We believe we've located the source of the fire coming from a small heating unit.
00:30
We are just continuing ventilation of the building of this time.
00:36
Woodside Command from Captain 34?
00:42
Both pull stations are reset and I have reset the whole arm and it's showing...
00:55
He's on scene from Woodside Command.
00:57
The plan is now we're going to shut the building back up and just ensure we don't have any smoke reaccumulating.
01:03
There's just one unit left that's not been cleared unit 204.
01:06
We're just going to stand by for a few minutes, make sure we don't have any rebuild backup of smoke and any other conditions and we'll clear.
01:18
Stand for 536.
01:24
Man, we copy the plan, be advised, there's no heat on any of utilities for the roof that we get in said.
01:31
We're just going to double check the alpha delta corner and confirm there's no heat.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.