Residential fire alarm activates at home near Hobart St, Monroe NC
Fire & ArsonA fire alarm was triggered at a residence near Hobart Street, Ponyeth Drive, and Allen Place. The call came from an alarm company reporting an activation of the keypad alarm. No confirmation of fire or smoke was found on scene.
Audio|Source: Union County and North Carolina State Fire
01:30
Transcript:
00:00
Engine 6 and engine 5, residential fire alarm, near Hobart Street, cross-street Ponyeth Drive and Allen Place, operate on hotel.
00:10
Engine 6 and engine 5, residential fire alarm, near Hobart Street, cross street Ponyeth Drive and Allen Place, operate on hotel.
00:30
Ten-four.
00:36
She got to point two.
00:39
Point-two.
00:42
This compartment when you said no injuries.
00:46
Ten-four.
00:47
Engine six, are you en route?
01:00
Engine 6, and you're copy to call for the fire alarm on Hobart Street.
01:04
See,
01:08
I'm just your show, engine 6 now.
01:11
1040. Engine 6, engine 5, you're up for a fire alarm in Scratford, near Hobart Street.
01:22
Near Hobart Street, calls in.
01:25
By the alarm company for a keypad alarm.
01:27
You have a high turn on the corner of Marniak and Hobart.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Hobart St, Monroe, NC 28110
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
