Disclaimer
Information OurBlock provides is made available solely to protect the public. Using this information to harass, threaten, or harm anyone is prohibited. Information is provided by third parties and may have errors. We cannot guarantee the accuracy, completeness, or timeliness of the information. Location data may not be 100% accurate. Use extreme care and always verify information through official sources and exercise caution and judgment when using OurBlock. By clicking continue, I agree I have read and understand the above and agree to these terms and conditions.

Smoke from cooking triggers commercial building fire alarmMilford CT

audio iconFire & Arson
Milford, CT

Firefighters responded to a commercial building in Milford, CT after a fire alarm went off. The building was partially evacuated. Investigators found no visible fire or smoke outside. The alarm was caused by smoke from cooking inside the building. The situation was resolved without further incident.

Audio|Source: Milford Fire Department
03:18
Transcript:
00:00
Hey,
00:01
Ryan, do you want to head around to the Charlie side where the panel is?
00:06
We'll investigate the business.
00:11
Receiver, still about two or three minutes now.
00:14
Okay.
00:25
2.5-dolson.
00:27
2.5 taken arrival and a two-story non-combustible commercial structure.
00:36
Nothing visible from the exterior.
00:38
Partially evacuated.
00:39
Point-5 will up command will be out-discating.
00:43
Two-story, not-combustible, construction, not evacuated.
00:52
Medic 2 is on-teen.
00:55
10-4[1]-Mak-2.
01:02
NG3-3-nilford recall, all be a doctor, looking at the service.
01:15
Engine 6 on-seen, head in Charlie's side fire panel.
01:27
Car 4 clear.
01:29
You're responding over to a offload truck.
01:33
So...
01:48
Sure.
01:50
All right. Okay.
01:53
Got to go for a reset.
01:55
I'm reading back. I'm reading back area of point.
02:04
Go ahead.
02:09
I'm reading back area oven on this panel here.
02:15
All right, 10-4[1], we're going to get, real quick.
02:34
Go for a reset. Go for a reset.
02:48
5.5.5.
02:52
Cisance.
02:56
Count four.
02:58
45, uh, close road to bumpers.
03:05
Determinate the incident, both units are clearing service.
03:08
Smoke from cooking.
03:16
Affords and service.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment of message received or understood.

Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.

Location mentioned:
Milford, CT

This shows a Google Street View of the area near the location, which might not be the exact address.

Correct
Incorrect

Explore More on Milford, CT Crime Map

Recent Fire & Arson Incidents in Milford, CT

Explore the crime map for more.