Smoke alarm triggered by workers in office building, Merrimack NH
Fire & ArsonFire crews responded to a smoke alarm activation near Daniel Webster Hwy in an office building. On arrival, they determined the alarm was accidentally triggered by workers and there was no fire. The situation was controlled with no hazards found.
Audio|Source: Merrimack Fire
02:15
Transcript:
00:00
Engine 1, Truck 1, Engine 2, respond to near Daniel Webster Hwy for a smoke alarm activation.
00:09
Engine 1, Truck 1, Engine 2, respond to near Daniel Webster Hwy.
00:15
It's going to be elite rehab for a smoke alarm activation at 10.05.
00:27
Ranger 2 to find out.
00:29
Ninja 2. Ninja 2.
00:32
You're responding.
00:35
You're responding 10.07.
00:37
10.07.
00:43
Number 1.001. Number 1. Back 1.
00:46
Responding.
00:48
Vision 1, truck 1, you're responding 10.07, holding by the alarm company showing basement office smoke detector activation.
01:00
My alarm, truck 1.
01:04
Answering truck 1.
01:06
Truck 1, Andrew 1,
01:09
on location.
01:10
1 half story, wood for him.
01:12
Here's working on C, we'll be investigating off the man.
01:21
Check one, you're on scene in the command, one and a half-story wood frame.
01:24
Here's to be workman on location. You're investigating a 10-0-8-1-1 -0-1-0-1-0-1. 10-1 is up to see.
01:38
Nothing showing up to 3-60.
01:43
10-1, you're on scene, nothing showing from a 360, 10-0-1.
01:52
Fireland truck one.
01:54
The answer intro.
01:58
You get a standard control. It's going to be set off by work, man.
02:01
So we send you one, engine two.
02:03
Hold the truck.
02:06
Placing the call on the control at 1009. Engine 1, engine 2, you'd be released by command.
02:14
10.09.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Daniel Webster Hwy, Merrimack, NH 03054
Correct
Incorrect
