Fire alarm at Salebank Drive with no visible smoke or flames, Mecklenburg County NC
A fire alarm was triggered at a location near Salebank Drive due to the zone 6 hallway smoke detector. However, no smoke or flames were observed inside or outside the building. Fire and inspection teams responded to investigate the alarm.
Audio|Source: Charlotte and Mecklenburg County Fire
01:39
Transcript:
00:00
Engine 28 and ladder 28, fire alarm, near Salebank Drive. Engine 28 and ladder 28, fire alarm, near Salebank Drive.
00:12
See this, (name withheld).
00:26
Yes, we'll certainly be someone from the fire marshal's office. We're probably going to need a structural engineer for inspection.
00:33
Civil.
00:41
Matthews Pallion's on scene.
00:43
Matthews is telling one to four. 11 are six in route.
00:46
One bill six to four.
00:52
Long to Ladder 28?
00:56
Oh,
00:58
Long.
00:59
Just confirming you are en route?
01:03
Yes, sir, indeed.
01:06
Ten, four, ladder 28.
01:11
4-long.
01:15
Go-tinger-4.
01:17
Medi-Com-Tay.
01:19
10-4004, Medi-Conteen.
01:25
A lot of the company responded to near Salebank Drive. The project is going to be Trinity Road in Claremour Place, 28 still.
01:33
Lock company called in a zone 6 hallway smoke detector.
01:36
No smoke flames inside.
01:38
There's nothing on the outside cameras. Okay.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Mecklenburg County, NC
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect