Smoke detected in building at McLeansville Rd, Mcleansville NC
Fire & ArsonFire crews responded to a building near McLeansville Road where smoke and a light haze were detected in the mezzanine and lobby. They checked for smoke removal needs and worked on ventilation. An investigator was called to the scene.
Audio|Source: Guilford Metro Fire
03:0
Transcript:
00:00
If you will, just go in the front and check on the smoke. They said they have a little bit of smoke coming up above mezzanine, see if there's any kind of any need for any kind of smoke removal in the building.
00:14
Tenfold.
00:18
Titch 28, 10-8[2], flight of front.
00:22
Ten-four. Ten-four.
00:27
Tanker 32 on support 108.
00:35
104. Chief 28 and all 208 equipment 108.
00:40
104.
00:44
104.
00:45
Go ahead.
00:50
Showtaker 58, 108.
00:52
108. 108. 10.
00:53
10.
01:04
Did you copy if it was an electric motor on the fire pump that I cut the power off?
01:14
You did cut the power off?
01:17
Yeah, 10-4[1]. We got three pumps down here. I had to cut the one center pump off on the fire pump.
01:29
Signal 50[3].
01:31
Engine 7-104.
01:37
Attention.
01:39
Engine 9. Respond to 909 at Inver Road Drive.
01:42
Medical call.
01:43
Cross Street of Manchester Drive and Pine River Road.
01:46
TACB2. Attention.
01:48
Engine 9. Respond to 909 at him for road drive.
01:52
Medical call.
01:53
Cross Street of Manchester Drive and Pineborough Road.
01:55
Tag B2.
02:05
Go ahead.
02:08
There is a light haze and smell of smoke, mezzanine, even if I'm in the lobby.
02:14
We can try to open the main doors as possible, but if it will be Jerry just try to do the other type of ventilation.
02:24
If you want to open up while we're here and we'll see how it clear is about.
02:29
If we all get some staff will see you help me out.
02:32
Okay, boy.
02:37
Investigator, contact GM911 on fire support.
02:53
2750 104, 213 is requesting investigator to near McLeansville Road.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
10-4: Acknowledgment or confirmation that a message has been received and understood.
[2]
10-8: In service and available for assignment or calls.
[3]
Signal 50: Agency-specific signal code indicating an emergency or priority situation; meaning varies by jurisdiction.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near McLeansville Rd, McLeansville, NC 27301
Correct
Incorrect
