False fire alarm caused by construction dust, Manlius NY
Fire & ArsonA fire alarm was triggered by a basement heat detector at a location near Linkside Drive. After investigation, the alarm was found to be caused by dust from construction, not an actual fire.
Audio|Source: Onondaga County Fire & EMS
01:4
Transcript:
00:00
...is fire, fire alarm[1], near Linkside Dr.
00:07
We're going to do it, car two.
00:11
We're going to hold with engine 14, rescue 14.
00:20
Christy, 1914, rescue 14 only for Jamesville Road.
00:24
Injur 14 to do it, car two.
00:31
Fire,
00:33
Fayville, Ladder 20,
00:35
put you in and out to what's all set on.
00:38
So, fire alarm[1] set, near Linkside Dr. off of Troop K Road,
00:43
came in through the alarm company, showing a basement heat detector operations channel 4 at 843.
00:53
As you're working officer to do it, do it easy.
00:57
Go ahead.
00:59
It's going to be dust from construction. I'm going to be a typical reset.
01:04
Appreciate.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
fire alarm: Automatic fire alarm activation
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Linkside Dr, Manlius, NY 13104
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
