Fire alarm triggered by water flow at Huntersville town hall, Huntersville NC
A fire alarm was triggered at the new town hall in Huntersville due to water flow detected in the riser room. Fire crews arrived and found no signs of fire. The alarm activation was caused by water flow, not smoke or fire.
Audio|Source: Charlotte and Mecklenburg County Fire
01:35
Transcript:
00:00
Huntersville Station 1, Station 3 fire, Cornelia Station 1 fire, fire alarm at the new town hall of Huntersville, near North Old Statesville Road, near Galeon and Maxville Avenue.
00:15
Up 6 for traffic, up 6 at 309.
00:22
That is a car 3 you're at.
00:24
Car 3 copying route.
00:30
Car 3 is on safe, four-story commercial, nothing showing. Car 3 be command.
00:35
Car 3, copy on scene.
00:37
Four-story commercial, nothing showing. Car 3 with command. Car 3, this is going to be a... Car 3, this is a Zone 176 water flow.
00:49
Cornelius, engine 3, harnessball engine 3, copy and out.
00:56
C4-1-2-3.
00:58
The engine 11 amount.
01:04
Engine 11, I'll soon.
01:07
Engine 11, copy.
01:13
Command central and all companies.
01:15
Engine 11 is investigating water flow activation in a riser room.
01:21
It's staged on old sages for the time being here.
01:29
Essential copies saw units staging on Old Stateville when they arrive, engine 11 investigating a water flow in the riser room.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near N Old Statesville Rd, Huntersville, NC 28078
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect