Fire alarm activated with no signs of fire at Pearl St, Chippewa Falls WI
Fire & ArsonA fire alarm was activated near Pearl Street in Chippewa Falls, but no smoke or fire was found. Officers on scene believe the alarm panel needs to be reset. The fire department was sent as a precaution.
Audio|Source: Chippewa County Sheriff and Chippewa Falls Police
02:2
Transcript:
00:00
If you could pull me a assist fire for an activated fire alarm,
00:05
no smoke or flames at this time.
00:07
Here's the panel just needs to be reset.
00:16
Ten and four, you need fire pageau.
00:23
Ten, four, they'll have to come reset the panel.
00:28
And we're...
00:40
City Fire, you are needed in Chippewa Falls,
00:43
near Pearl St for an activated fire alarm, law enforcement on scene advises no smoke appears to be an alarm panel that needs to be reset.
01:11
City Fire, urinated at near Pearl St.
01:15
Near Pearl St for an activated fire alarm.
01:19
Law enforcement unseen advises no smoke, no fire, appears to be an alarm panel that needs to be reset.
01:25
Kind of clear at 2257.
01:28
Sameatue, kind of fetch.
01:30
You can show my two on same three-story brick building.
01:34
No visible signs of evacuation or alarm from the outside will be out with officers investigating.
01:42
Ten four, that's two.
01:48
Engine two copies.
01:51
Engine two will be responding.
01:55
Stand for engine two.
02:02
Thanks one, copy.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Pearl St, Chippewa Falls, WI 54729
Correct
Incorrect
