Smoke detector activates fire alarm with no visible fire, Charlotte NC
Fire & ArsonA fire alarm was activated near Craven Hill Drive due to an active smoke detector in a hallway. However, no visible smoke or fire was found when responders arrived.
Audio|Source: Charlotte and Mecklenburg County Fire
02:4
Transcript:
00:00
Engine twenty-eight and louder twenty-eight.
00:02
Fire alarm, near Craven Hill Dr. Engine twenty-eight and louder twenty-eight.
00:08
Fire alarm.
00:10
Near Craven Hill Dr.
00:17
So I'm going to respondent near Craven Hill Dr. Cross Street is going to be Emily Lane in Lincoln Mill Road, 2080 still.
00:25
Problem company called in a zone 18 hallway smoke detector, unknown smoke for flames on the premise.
00:30
It did advise while we were on the phone, pop codes were entered into the panel.
00:42
He's a 28 copy. We're going to proceed in non-emergency ladder to return the service.
00:49
10-428.
00:58
CMPD has been notified and is being dispatched.
01:03
Is there anything else he needs from alarm?
01:07
Negative. You can show us available, I'm seeing.
01:11
10-435.
01:13
5132 alarm patient contact no C.
01:22
1014-1132, patient contact, no CPR.
01:29
20 of the alarms.
01:32
Agent 20, go ahead.
01:38
Do you have a property rep on file for this address?
01:44
I can check FDM.
01:50
Do you need them to respond out?
01:54
That's affirmative. You can give somebody.
01:57
We cannot find the control counter to reset alarm. They do have an active smoke alarm,
02:03
but there's no smoke or fire.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Craven Hill Dr, Charlotte, NC 28216
This shows a Google Street View of the area near the location, which might not be the exact address.
Correct
Incorrect
