Fire alarms activated at hospital and residence in Buffalo, Buffalo NY


Buffalo Fire Department responded to fire alarm activations at a hospital near Elm St and a residence near Weathers St. Both alarms were investigated with no visible fire found. The incidents occurred without any reported fire or injuries.
Audio|Source: Buffalo Police, Fire and EMS
01:46
Transcript:
00:00
A preliminary signal engine 2, engine 21, ladder 6 and B43, response to Roswell at near Elm between Elm and Carlton. That's for the activated commercial alarm.
00:14
A preliminary signal, engine 2, engine 21, ladder 6 and B43, response to Roswell's main hospital building at near Elm. That's the investigated commercial alarm activation time, 2009. Buffalo fire.
00:34
643, you're responding to Roswell's main hospital building at near L. To investigate a commercial line, coming from Zone 1, you have a PS.
00:47
Your radio.
00:54
Do you have an ETA for the ambulance?
00:57
One moment.
01:03
Covered 432.
01:07
Go ahead.
01:11
EG2 is on location investigating.
01:13
Nothing showing.
01:14
We've got a visual and audible alarms.
01:18
Engine 2 on location, nothing's showing.
01:21
Visible and... ...all alarm.
01:27
So alarm level two response to near Weathers between Lang and East Sullivan and to go for engine 31 and letter 14.
01:35
So alarm level two response to near Weber between Lang and E. Sullivan to investigate a residential fire alarm activation.
01:43
To go friends of 31 and letter 14.
01:45
Time, 2013, Buffalo fire.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Elm St, Buffalo, NY 14203
Correct
Incorrect