Fire alarm at building on Kenmore Ave with no fire found, Buffalo NY
Fire & ArsonFire and police units responded to a fire alarm activation near Kenmore Ave between Colvin and Rowley. The alarm was ringing inside the building, but no actual fire was found. The situation was investigated without incident.
Audio|Source: Buffalo Police, Fire and EMS
01:10
Transcript:
00:00
Preliminary signal level 2[1] response to near Kenmore Ave between Colvin and Rowley to go for into 38, into 36, 9 of 13, and B47.
00:10
Preliminary signal, level 2 response to near Kenmore Ave, between Colvin and Rowley.
00:16
To investigate ringing alarms inside of the building, to go for into 38, injor 36, 13, and B4-7, time 2328, self-office.
00:29
is a photo working.
00:36
1301.
00:39
You want to go to 1 is the answer?
00:46
Shots wired on Amber,
00:49
if we could call them, it'd be great.
00:52
That's great.
00:59
47 is responding.
01:02
347, your respondent to near Kenmore Ave between Colvin and Rowley to investigate ringing alarms inside the building,
01:09
civil peers.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
signal level 2: Preliminary elevated response level indicating additional units/resources requested
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Kenmore Ave, Buffalo, NY 14217
Correct
Incorrect
