Fire alarm triggered falsely during system setup, Buffalo NY


A fire alarm went off at near Brentwood Drive in Amherst due to smoke and CO detectors activating. It was later found to be a false alarm caused by the homeowner while setting up a new alarm system.
Audio|Source: Amherst Fire Control
01:46
Transcript:
00:00
IASO fire alarm activation at near Brentwood Dr.
00:05
Between a Hedgewood Drive and Hedgewood Drive is reporting basement and bedroom smoke and CO detectors.
00:28
ASL file arm activation at near Brentwood Dr.
00:33
Clean Hedgewood Drive in dead end.
00:36
Arm comes reporting basement and bedroom smoke and seal smoke detectors going off.
00:42
1413 Amherst Fire.
00:53
Amherst, Air Force, 9 responding.
00:59
Airfield 9, responding. Air Force 9 responding.
01:10
Amherst, Sheriff's 9, 2, response.
01:21
Aeros 19. Airsone 90.
01:27
Go ahead.
01:31
My company is reporting the homeowner was setting up the new system and triggered all these things.
01:42
That's clear, you can hold everything in quarters, so I'll be on location in a minute.
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.
Location mentioned:
Near Brentwood Dr, Buffalo, NY 14221
Correct
Incorrect