Truck flips onto side on Louisa Road with patient rescue, Albemarle County VA


A large truck flipped onto its side on Louisa Road. Emergency crews are working to rescue at least one person trapped inside. The road is likely closed due to the incident.
Audio|Source: Albemarle County Fire and Rescue
02:55
Transcript:
00:00
If you see Vattain-(number withheld).
00:08
I'm on scene[1],
00:10
one-load truck on its side. I'll be out investigating November command and I'll get you an update shortly.
00:14
Receive you're on location and one-law truck on its side, UNF command.
00:17
Update to follow us 2035.
00:24
916 on site.
00:25
1916, 23, sir.
00:31
151.50. 1.30 seconds.
00:38
Command and command. I'm going to have you guys call up.
00:43
Evening for example.
00:47
ETCC terms of command for that date.
00:49
Command.
00:53
We'll be the road. Command.
00:59
EPCC engine five pressure.
01:02
Andrew Fodziancy.
01:03
Direct, 239.
01:06
EECC to Louis the road command, go ahead.
01:09
Chief 21 is right.
01:11
Chief 21, 239.
01:14
Chief 21, 239.
01:17
We do have one pan by the arm under the PIPOs. We'll be working this table out next, okay.
01:27
First be a 2033.
01:29
ECC, Medicare.
01:31
Medical London Rock PVA, 2040.
01:33
Okay, I'm from Squad 11. Are we going to be able to get close?
01:36
Squad, can you repeat?
01:39
Are we going to be able to get close?
01:46
Right now, no.
01:48
But I'm trying to work on it for you. Either way when you get here,
01:52
if you're not close, I'll have you come up with the Paratex. We're going to prepare to do a tieback through the engine 21.
02:01
Copy. We're a present now.
02:05
Okay.
02:14
Attention all station, 2, 16, 11, and rescue, 16,
02:20
personnel. A working extracation has been declared on Louisa Road.
02:29
Hello.
02:30
Hello. Hello.
02:35
About 11 from the man, you guys all of us, we need to set up for a potential flips as well.
02:44
Paul Levin, come up with a jet fuller as well.
02:52
ECCC, Medicaid, arrives at UBA.
02:54
Medicaid, 28, 243.
Police codes explained
The following codes appeared in the transcript and are explained below:
[1]
on scene: Unit has arrived at the incident location
Disclaimer:
This transcript was automatically generated and may contain inaccuracies. Please verify the information independently.